3D · JP041
Inspect the lid, hinge or sliding drawer in normal use.
A separate lift-off cover and base surround a third, wrapped inner tray.

Main source shell reference dimensions. Inside dimensions describe the completed inner tray cavity and closed roof.
Complete closed assembly envelope: 301.6 × 252 × 82.4 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.1181 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1478 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.1181 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1478 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.1471 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1781 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Six outlines: two V-grooved exterior crosses and their papers plus a non-V-groove inner cross and wrap. The archived exterior wraps are separate and the cover lifts to clear the inner tray. The inner half-cut preparation is represented by a board-hinge operation. Editable geometry was reconstructed from the archived drawing, dimension table and available reference views. Neutral-axis allowances, adhesive, paper joints and tooling require a prototype.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.