3D · JP026
Inspect the lid, hinge or sliding drawer in normal use.
Two separately wrapped shells, two folded collar halves and a double-scored connecting paper hinge.

Main source shell reference dimensions. Inside dimensions describe the completed inner tray cavity and closed roof.
Complete closed assembly envelope: 240 × 180 × 60 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 1.5 mm | 1 | 100 | 0.0657 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0870 m² | |
| Greyboard core | 1.5 mm | 1 | 100 | 0.0657 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0870 m² | |
| Greyboard core | 1.5 mm | 1 | 100 | 0.0222 m² | |
| Greyboard core | 1.5 mm | 1 | 100 | 0.0222 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0413 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0422 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0105 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 1.5 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Nine blanks. The source drawing shows a cut between the two matching L-shaped collar boards, two distinct half-wrap strips, and a separate 20 mm hinge strip with two scores 4.2 mm apart. The collar paper with 10 mm end laps uses a different contour from its mate. The rebuilt shell holds the outer size. The collar span and hinge registration are calibrated for the cover to swing over the shoulder. Editable geometry was reconstructed from the archived drawing, dimension table and available reference views. Neutral-axis allowances, adhesive, paper joints and tooling require a prototype.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.