3D · JP032
Inspect the lid, hinge or sliding drawer in normal use.
Four-board presentation case with a removable three-board hardcover.

Complete closed assembly envelope: 284.52 × 271.4 × 32.02 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2.5 mm | 1 | 100 | 0.0753 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.0061 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.0745 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.0061 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1934 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0889 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.0966 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1258 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0689 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.0652 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.0038 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.0652 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1597 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2.5 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
The dieline shows the folding blanks after corner waste removal. Use Raw stock groove DXF for the rectangular board and extended groove axes.
Four separate outer boards are attached by a continuous paper wrap with flexible joints. The removable hardcover has three independent boards and its own paper spine hinges. A separate rectangular lining covers the inner tray floor. The opening animation clears the case lid, raises the book above the tray, and then turns the book cover. The source shows a two-leaf page reference. Page stock, page count and binding allowance require a separate specification. Fold offsets and wrap returns are reconstructed to fit the modeled stock. Confirm magnetic hardware and tooling against a physical sample.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.