3D · JP035A
Inspect the lid, hinge or sliding drawer in normal use.
Seven source blanks include unequal 96.9 and 67 mm lid faces, a raised hinge and a 5 mm perimeter wrap corner notch.

Inside dimensions describe the usable base cavity. Outside dimensions measure the closed assembly. Die-line dimensions use the main case reference axes.
Complete closed assembly envelope: 202.4 × 102.4 × 65 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0773 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0993 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0211 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0153 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0504 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0532 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0482 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Seven source blanks include unequal 96.9 and 67 mm lid faces, a raised hinge and a 5 mm perimeter wrap corner notch. The upper leaf opens before the lower leaf and closes after it, preserving the source overlap without passing the two boards through each other. Materials are modeled at the selected calipers. Hinge relief, adhesive and hidden closure hardware require factory confirmation.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.