3D · HC011
Inspect the lid, hinge or sliding drawer in normal use.
Equal hinged covers open to the sides above a separate wrapped inner tray.

Case fold axes. Inside dimensions measure the tray opening and the space up to the closed lid.
Complete closed assembly envelope: 255.5 × 262.7 × 77.4 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2.3 mm | 1 | 100 | 0.1035 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1292 m² | |
| Greyboard core | 2.3 mm | 1 | 100 | 0.1243 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1510 m² | |
| Greyboard core | 2.3 mm | 1 | 100 | 0.0516 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0662 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0186 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0186 m² | |
| Greyboard core | 2.3 mm | 1 | 100 | 0.0516 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0662 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0186 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0186 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2.3 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
The dieline shows the folding blanks after corner waste removal. Use Raw stock groove DXF for the rectangular board and extended groove axes.
The HC011 source drawing shows a 252 × 260 mm case, two 37.1 mm shell depths, a 65.7 mm inner tray and 2.3 mm board. The base and two three-sided lids are V-grooved. The separate inner tray follows the source half-cut board hinges. Two equal lids, both wraps, the two trays and four paired papers are scheduled separately. Paper crease offsets account for the full board thickness. The hinge-strip bond positions and opening range are reconstructed.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.