3D · HC010
Inspect the lid, hinge or sliding drawer in normal use.
Two mirrored winged doors, separate door papers, an outer U-board and separately wrapped inner perimeter are reconstructed from the retained flat drawing.

Inside dimensions describe the usable base cavity. Outside dimensions measure the closed assembly. Die-line dimensions use the main case reference axes.
Complete closed assembly envelope: 385.4 × 332.9 × 102.9 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2.5 mm | 1 | 100 | 0.1147 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1336 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1120 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.1147 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1336 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1120 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.1847 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1865 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0696 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.0647 m² | |
| Greyboard core | 2.5 mm | 1 | 100 | 0.0647 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1720 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2.5 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Two mirrored winged doors, separate door papers, an outer U-board and separately wrapped inner perimeter are reconstructed from the retained flat drawing. The touching perimeter regions are built as two folded corner groups. The isolated bottom auxiliary piece is represented as an underfloor mount. Its attachment and exact stock are unresolved. Materials are modeled at the selected calipers. Hinge relief, adhesive and hidden closure hardware require factory confirmation.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.