3D · HC108
Inspect the lid, hinge or sliding drawer in normal use.
Two separate main core blanks share one flexible hinge. Lid sides have one diagonal gusset each and base sides have two.

Inside is the usable base cavity, outside is the complete closed assembly including material, and neutral dimensions are the source reference size inputs.
Complete closed assembly envelope: 306.1 × 205.2 × 81.4 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.1054 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0145 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0042 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0042 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0544 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0145 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0042 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0042 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0544 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0840 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0151 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0045 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0469 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0151 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0045 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0469 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.2230 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1841 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
The separate two-band lid and three-band base are joined by the outside paper across the measured 6 mm hinge span. Each lid end preserves one mirrored paper gusset and diagonal insert. Each base end preserves two. The hidden cap seating offsets and adhesive pattern are nominal.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.