3D · HC107A
Inspect the lid, hinge or sliding drawer in normal use.
A shallow cut-cross lid covers a collapsible deep base with unequal long bands and separate wrapped end boards.

Inside is the usable base cavity, outside is the complete closed assembly including material, and neutral dimensions are the source reference size inputs.
Complete closed assembly envelope: 158.4 × 158.4 × 103.1 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0481 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0606 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0437 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0109 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0031 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0031 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0413 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0109 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0031 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0031 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0413 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0365 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0519 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
The lid core perimeter is cut as a cross. At the sample, its fold rectangle is 156 × 156 mm and its wall bands are 19.5 mm. The lid underside meets the base at a rim seam with measured clearance. The photos show the external cap seam. Its hidden coupling and clearance formulas are nominal.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.