3D · HC024X
Inspect the lid, hinge or sliding drawer in normal use.
Five main case boards plus separate front and back inner fold boards, each with its own wrap and liner.

Complete closed assembly envelope: 274.4 × 200.01 × 93.27 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 3 mm | 1 | 100 | 0.0236 m² | |
| Greyboard core | 3 mm | 1 | 100 | 0.0521 m² | |
| Greyboard core | 3 mm | 1 | 100 | 0.0236 m² | |
| Greyboard core | 3 mm | 1 | 100 | 0.0531 m² | |
| Greyboard core | 3 mm | 1 | 100 | 0.0236 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.2131 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1692 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0153 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0720 m² | |
| Greyboard core | 1 mm | 1 | 100 | 0.0034 m² | |
| Greyboard core | 1 mm | 1 | 100 | 0.0034 m² | |
| Greyboard core | 1 mm | 1 | 100 | 0.0034 m² | |
| Greyboard core | 1 mm | 1 | 100 | 0.0034 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0153 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0720 m² | |
| Greyboard core | 1 mm | 1 | 100 | 0.0034 m² | |
| Greyboard core | 1 mm | 1 | 100 | 0.0034 m² | |
| Greyboard core | 1 mm | 1 | 100 | 0.0034 m² | |
| Greyboard core | 1 mm | 1 | 100 | 0.0034 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0221 m² | |
| Outer wrapping paper | 0.1 mm | 1 | 100 | 0.0336 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0200 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0221 m² | |
| Outer wrapping paper | 0.1 mm | 1 | 100 | 0.0336 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0200 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 3 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
The hidden inner-fold attachment and split-square splint separations are nominal reconstructions. The dieline re-creates the separately drawn board, paper, liner and card blanks in millimetres. Assembled and Flattened are reversible construction views. The folding control follows the physical scores from flat blanks. The assembled case has a separate lid opening. Test the nominal hidden joints and tape allowances with a physical sample before production.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.