3D · HC106E
Inspect the lid, hinge or sliding drawer in normal use.
Five continuous V-grooved case bands and two side boards with perforated end wings. The side papers have straight folds.

Complete closed assembly envelope: 200.2 × 182.4 × 102.4 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.1294 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1618 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1238 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0220 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0529 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0220 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0529 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Five continuous V-grooved case bands and two side boards with perforated end wings. The side papers have straight folds. Three case hole arrays and four pockets per side board follow the visible pattern. Diameters of unlabelled circles, drilling method and concealed fasteners are unspecified. The reversible assembly shows the flat stock, seated parts and normal cover opening. A factory sequence for collapsing the bonded box, joint strain and glue placement remain nominal.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.