3D · HC004D
Inspect the lid, hinge or sliding drawer in normal use.
A five-band outer case, a separate cross-shaped wrapped inner tray and an auxiliary blank with unequal end bands.

Inside is the usable base cavity, outside is the complete closed assembly including material, and neutral dimensions are the source reference size inputs.
Complete closed assembly envelope: 300.6 × 202.4 × 82.4 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.1904 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.2349 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.1302 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1623 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1266 m² | |
| Folding-card insert | 0.2 mm | 1 | 100 | 0.1047 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
The unequal 80 and 77.5 mm case ends are carried through to the solid model. The auxiliary carrier retains its source 95 and 75 mm end bands at the sample dimensions. The sample shows the selected STY07 and STY08 version. Alternate selector layouts and the hidden auxiliary mounting sequence are unavailable. Its taller auxiliary band tucks inward under the cover in this reconstruction.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.