3D · HC106D
Inspect the lid, hinge or sliding drawer in normal use.
Four unequal case bands, a continuous four-wall collar and two floor pieces with long triangular lobes.

Complete closed assembly envelope: 200.2 × 181.4 × 101.4 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 1 mm | 1 | 100 | 0.1113 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1365 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.1076 m² | |
| Greyboard core | 1 mm | 1 | 100 | 0.0716 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1114 m² | |
| Folding-card insert | 0.5 mm | 1 | 100 | 0.0560 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0518 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 1 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Four unequal case bands, a continuous four-wall collar and two floor pieces with long triangular lobes. The two visible pairs of circular pockets follow the source layout. Pocket tooling and hidden fasteners are unspecified. The reversible assembly shows the flat stock, seated parts and normal cover opening. A factory sequence for collapsing the bonded box, joint strain and glue placement remain nominal.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.