3D · JP021C
Inspect the lid, hinge or sliding drawer in normal use.
A deep four-band case around a separately cut-cross inner tray and rectangular floor liner.

Complete closed assembly envelope: 211.4 × 112.1 × 69.9 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0739 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0917 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0494 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0558 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0983 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0192 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Six pieces. The cross-shaped source inner board is half-cut, and its full-height paper return stops at the inner floor in the fitted reconstruction. The case board uses V-slot axes and a 211.4 mm source paper span. Positions are derived from the source drawings and displayed dimensions. Nominal full-caliper fit allowances are recorded separately from the captured vendor sizes. The editable core pockets represent covered closure cavities. Hidden hardware, groove tooling and paper hinge flex require physical validation.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.