3D · JP021
Inspect the lid, hinge or sliding drawer in normal use.
A continuous case and separate tray with paired blind closure pockets and independent cross lining.

Complete closed assembly envelope: 200.4 × 102.4 × 62.4 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0630 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0819 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0402 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0492 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0516 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0463 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Six pieces. Case closure pockets have radius 8 and the tray pockets radius 5. Tray pocket spacing is 133 mm at the source size. The paper band includes the shorter closing wall and underfloor edge laps. Positions are derived from the source drawings and displayed dimensions. Nominal full-caliper fit allowances are recorded separately from the captured vendor sizes. The editable core pockets represent covered closure cavities. Hidden hardware, groove tooling and paper hinge flex require physical validation.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.