3D · JP001V
Inspect the lid, hinge or sliding drawer in normal use.
A 54 mm square source base and full-depth lift-off lid, with long end returns and short side returns.

Neutral L, W and H are base board axes. Inside H measures base depth and outside H measures the closed assembly.
Complete closed assembly envelope: 63.8 × 63.8 × 23.35 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0071 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0115 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0091 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0143 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Four separate blanks. The annotated V-groove source uses 18/4 mm returns on the base and 19.6/4 mm on the lid, plus direction-specific wrap allowances. Neutral hinge planes are rebuilt from the selected material gauges. Captured source cut and wrap extents are retained separately where the source groove and paper allowances differ. Machining profile, residual board skin, paper compression and adhesive buildup remain supplier settings. Check a physical sample before tooling.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.