3D · HC101C
Inspect the lid, hinge or sliding drawer in normal use.
A 20 mm lid covers the taller, separately lined base. The cut-cross base has two unequal wall heights.

Neutral L and W are cover board axes. Neutral H is the lower core sidewall height. Inside dimensions describe the base.
Complete closed assembly envelope: 152.4 × 152.4 × 56.15 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0500 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0674 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0464 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0345 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0495 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0317 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Source D0 is the 20 mm lid wall. The base cross shows 50 mm east/west and 52 mm north/south walls. Both cross liners are visible in the retained flat plan and selectable here. Neutral hinge planes are rebuilt from the selected material gauges. Captured source cut and wrap extents are retained separately where the source groove and paper allowances differ. Machining profile, residual board skin, paper compression and adhesive buildup remain supplier settings. Check a physical sample before tooling. The neutral paper return stops just above the covered inside floor to allow for board thickness.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.