3D · HC102D
Inspect the lid, hinge or sliding drawer in normal use.
Two wrapped rigid shells and floor papers surround one doubled folding-card collar.

Inside L/W are the finished neck aperture. Inside H is complete floor-to-lid enclosed height; neutral H is the lid roof board plane above the base core floor.
Complete closed assembly envelope: 202.4 × 152.4 × 65.2 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0510 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0702 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0291 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0510 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0773 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0291 m² | |
| Folding-card insert | 0.4 mm | 1 | 100 | 0.0826 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Separate physical blanks use the selected actual calipers. All scores and motion are editable, independent geometry; vendor/factory exactness is not asserted. Board hinge/groove axes, paper corner reliefs, glue compression and hardware-free assembly are nominal. Confirm cutter profile, depth, residual skin and physical fit before production. Seven source blanks when both floor papers are enabled. The 0.4 mm card collar replaces both greyboard neck and neck wrap. Live studio STY Yes retains a rectangular lid floor liner; STY No changes it to a full cross. The base floor liner and card collar stay unchanged. The card collar retains 60 mm outer and inner walls and a 15 mm side lap at the captured default. Paired cap scores separate the walls by the real card caliper.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.