3D · HC102C
Inspect the lid, hinge or sliding drawer in normal use.
Three-millimetre outer shells surround a two-millimetre continuous greyboard neck.

Inside L/W are the finished neck aperture. Inside H is complete floor-to-lid enclosed height; neutral H is the lid roof board plane above the base core floor.
Complete closed assembly envelope: 203.4 × 153.4 × 67.5 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 3 mm | 1 | 100 | 0.0510 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0719 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0288 m² | |
| Greyboard core | 3 mm | 1 | 100 | 0.0510 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0790 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0288 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0402 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0676 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 3 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Separate physical blanks use the selected actual calipers. All scores and motion are editable, independent geometry; vendor/factory exactness is not asserted. Board hinge/groove axes, paper corner reliefs, glue compression and hardware-free assembly are nominal. Confirm cutter profile, depth, residual skin and physical fit before production. Eight source blanks with both rectangular floor linings. Outer core and neck calipers are independent. The neck has a separate paper band with inner returns. Live studio STY Yes retains a rectangular lid floor liner; STY No changes that same blank to a full cross liner. Base floor liner and neck core/paper stay unchanged. The captured neck outer paper height is 40 mm and inner return 57 mm.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.