HC104A · Four-band cover · recessed base

A full-height front flap closes over a base shortened by the observed board / paper allowance.

HC104A original construction illustration
Your rigid box
Usable inside 299.6 × 197.2 × 77.2 mmOutside 300.4 × 202.4 × 82.4 mm3 physical blanks · 32 linked panels

Complete closed assembly envelope: 300.4 × 202.4 × 82.4 mm

3D · HC104A

Drag to rotate · pinch or use + / − to zoom

Inspect the lid, hinge or sliding drawer in normal use.

Cutting plans · HC104A

Four-band rigid case core · base / glue tabFour-band rigid case core · spineFour-band rigid case core · lidFour-band rigid case core · upper closing flapOuter case paper with edge returns · base / glue tabOuter case paper with edge returns · spineOuter case paper with edge returns · lidOuter case paper with edge returns · upper closing flapOuter case paper with edge returns · board-edge paper capOuter case paper with edge returns · paper turn-inOuter case paper with edge returns · board-edge paper capOuter case paper with edge returns · paper turn-inOuter case paper with edge returns · board-edge paper capOuter case paper with edge returns · paper turn-inOuter case paper with edge returns · board-edge paper capOuter case paper with edge returns · paper turn-inOuter case paper with edge returns · board-edge paper capOuter case paper with edge returns · paper turn-inOuter case paper with edge returns · board-edge paper capOuter case paper with edge returns · paper turn-inOuter case paper with edge returns · board-edge paper capOuter case paper with edge returns · paper turn-inOuter case paper with edge returns · board-edge paper capOuter case paper with edge returns · paper turn-inOuter case paper with edge returns · board-edge paper capOuter case paper with edge returns · paper turn-inOuter case paper with edge returns · board-edge paper capOuter case paper with edge returns · paper turn-inContinuous inner case lining · base / glue tabContinuous inner case lining · spineContinuous inner case lining · lidContinuous inner case lining · upper closing flap300L · mm197.2W · mm300.2L · mm198.4W · mm294L · mm192.9W · mm998.6layout · mm598.4layout · mm
100%
Drag to pan · use + / − to zoom
Choose a panel in either view to inspect the same part.

Construction & material thickness

Cover-only reference: no tray is supplied. Normal cover opening is separate from manufacturing folding. Dimensions, paper flex, adhesive and closure hardware are nominal pending a production sample.

Artwork on paper

Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.

Placement

Paper appearance

Preview colours are separate from material caliper and print-ready colour specifications.

Printing & finishing

Spot UV, foil and embossing require separate production masks. Their precise relief and spot positions are not simulated.

Quotation details

Components & cutting list

BlankMaterialCaliperPer setOrder blanksNet area / set
Greyboard core2 mm11000.1672 m²
Outer wrapping paper0.2 mm11000.1984 m²
Lining paper0.2 mm11000.1598 m²

Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.

Separate sheet plans & machine settings

Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.

Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.

Cutting machine limits

CAD & proof files

All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.

HC104A · Four-band cover · recessed base100 sets · Rigid box · To be quoted
Construction checks & source references

Independently reconstructed from the saved technical plan and published source parameters. These are editable design dimensions, not native vendor CAD or a factory-validated cutting recipe. This reference supplies a case cover only. No inner tray or hidden side walls have been invented. Manufacturing fold and normal 180° cover opening are separate. Core, covering paper and inner lining use a common assembled opening axis; flexible paper behaviour immediately around the hinge is nominal. Paper flat neutral dimensions are solved from the full-caliper assembly; listed source paper dimensions are retained separately as reference anchors because the vendor bend / groove convention is not established. V-groove width, depth, residual board skin, half-cut tooling, adhesive compression, magnets and strength require a production specification.

Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.

Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.

Review your quotation brief

HC104A · Rigid box · Price to be quoted

DesignHC104A · Four-band cover · recessed base
CategoryRigid boxes
Reference—
Dimension subjectCase length, lid span and spine height
Dimensions entered300 × 200 × 80 mm · Neutral fold lines
Usable inside299.60 × 197.20 × 77.20 mm
Outer dimensions of selected subject300.40 × 202.40 × 82.40 mm
Physical blanks per set3
Fit clearance0.5 mm per side
PrintingNo printing
Film laminationNo film lamination
UV coatingNo UV coating
Foil stampingNone
Emboss / debossNone
ArtworkNone
Quantity100 sets
Overrun0%
DeliveryCollection
Notes—
Four-band rigid case coreGreyboard core · 2 mm · 100 blanks · 16.716 m² net
Outer case paper with edge returnsOuter wrapping paper · 0.2 mm · 100 blanks · 19.845 m² net
Continuous inner case liningLining paper · 0.2 mm · 100 blanks · 15.976 m² net

Revisions stay on this device. No order or payment has been submitted.