3D · HC006A
Inspect the lid, hinge or sliding drawer in normal use.
The tall four-wall body has four lower paper laps and a separate inset covering square.

Complete closed assembly envelope: 132.4 × 132.4 × 280.6 mm
Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.1456 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.1735 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0164 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0164 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0094 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0205 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0285 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
This tall case has a four-wall body, a separate bottom board, and a hinged three-band cap. The four lower paper laps receive a separate bottom sheet. Its stock assignment is inferred from the distinct 128 × 128 mm outline. The small three-band blank is shown separately. Its mouth seating and hinge attachment are nominal interpretations of the retained technical drawing. The normal lid sweep is independent of the manufacturing fold. Paper flex, groove stock, adhesive and retention need supplier confirmation.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.