3D · HC004
Inspect the lid, hinge or sliding drawer in normal use.
Four articulated cover panels surround a separate wrapped greyboard tray.

Inspect the lid, hinge or sliding drawer in normal use.
Outside artwork prints on wrapping paper. Inside artwork prints on lining paper. Greyboard remains a separate core.
Preview colours are separate from material caliper and print-ready colour specifications.
| Blank | Material | Caliper | Per set | Order blanks | Net area / set |
|---|---|---|---|---|---|
| Greyboard core | 2 mm | 1 | 100 | 0.0590 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0824 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0320 m² | |
| Greyboard core | 2 mm | 1 | 100 | 0.0441 m² | |
| Outer wrapping paper | 0.2 mm | 1 | 100 | 0.0746 m² | |
| Lining paper | 0.2 mm | 1 | 100 | 0.0176 m² |
Net areas exclude holes and overlaps between panels in the same blank. Stock sheets, waste and adhesive are separate.
Different calipers have independent sheet plans. Each component remains a distinct blank. Prepared greyboard uses the full rectangular stock for sheet yield.
Sheet sizes are format references; the model uses 2 mm material. Confirm stock, grain and availability in the quotation.
All materials selected for SVG, DXF and OBJ. Animated glTF and the editable record contain the complete assembly.
Four-panel case with a separate wrapped tray; the closing flap and paired core cut-outs remain distinct from the three-panel cover-only design. Dimensions describe the independently reconstructed material assembly. Source die-cutting anchors are retained as reference values, not asserted as factory-equivalent formulas. The first case band is shortened by half the outer-core caliper and the nested tray is shifted with the lid. This preserves the observed default 99 / 50 / 100 / 47.1 mm band widths; the half-caliper rule is independently reconstructed, not an established vendor V-cut convention. Core closure holes align geometrically with the tray wall. Wrapping paper covers those cavities; closure hardware and recess depth require a supplier specification. Paper return reliefs, hinge compression and adhesive allowance are nominal.
Packmage drawings, dimensions, options and accessible 3D states are recorded per design. EasyPackMaker provides independent construction-family and material-fit comparisons. Matching codes do not prove matching physical designs.
Tooling grooves, residual skin, adhesive compression, hardware and physical fit still require a supplier sample. This is an independently editable construction, with source-specific differences recorded; factory equivalence is not claimed.